top of page
IMA 30 Installation Mixing Amplifier

IMA 30 Installation Mixing Amplifier

lnstallation Mixing Amplifier 35W @ 4 Ohms / 100 V / 70 V

Specifications

-Emergency input 1 balanced line input

-Mic/ line inputs 2

-Music sources 2 unbalanced stereo line inputs, Bluetooth 4.0

-Line outputs 1

-Powered outputs 1 with output mode selector (Low-Z/High-Z)

-Cooling Convection

-Priority levels 4

Emergency Input

-Nominal input sensitivity -6 dBu (Sine 1 kHz, Gain max)

-Nominal input clipping  20 dBu (Sine 1kHz)

-Connector 5-pin Terminal Block, pitch 5.08mm

Music inputs - CD/AUX

-Nominal input sensitivity CD/AUX - 6.22 dBV (Sine 1 kHz, Gain max)

-Nominal input clipping CD/AUX 7.78 dBV (Sine 1kHz)

-Connector CD/AUX 2 x dual RCA Mono Summed

Amplifier Output

-Amplifier Outputs High-Z: 70V or 100V outputs, Low-Z: 4 ohm minimum load

-Preamplifier input  5-pin Terminal Block, pitch 5.08mm

-RMS Power ( W )  35 W (Continuous sine wave 1kHz, 4 ohm load)

-Power ( Peak ) (W)  39 W (100 msec sine 1kHz burst @ 4 ohm load)

-Frequency range  20 Hz - 20 kHz (LO-Z, -3 dB), 60 Hz - 20 kHz (HI-Z, -3 dB)

-Tone controlBass  +/-10dB (100Hz)

-Tone control Treble +/-10dB (100Hz)

-Protection circuits  Audio Limiter, over-current, short circuit, thermal overload

Aux Output

-Connector AUX-output  3-pin Terminal Block, pitch 5.08 mm

-Maximum gain  22 dB

General data

-Operating voltage  100 V AC - 240 V AC, 50 - 60 Hz

-Power consumption (max.)  70 W

-Idle power consumption  7 W (no signal input)

-Operating temperature ( non-condensing )  0°C - 40°C; < 85% humidity, Non condensing

-Time to Auto-standby  20

-Dimensions (W x H x D) ( height with rubber feet )210 x 96.5 x 266.76 mm

 

    bottom of page