top of page
IMA 120 Installation Mixing Amplifier 120W

IMA 120 Installation Mixing Amplifier 120W

Installation Mixing Amplifier 120W @ 4 Ohms / 100 V / 70 V

Specifications

-Emergency input  1 balanced line input

-Mic/ line inputs 2

-Mic-/ Line Input Connectors  2 unbalanced stereo line inputs, Bluetooth 4.0

-Music sources  2 unbalanced stereo line inputs, Bluetooth 4.0

-Line outputs 1

-Reinforced Main Outputs 1 with output mode selector (Low-Z/High-Z)

-Cooling  Convection

-Priority levels 4

Emergency Input

-Nominal input sensitivity  -15 dBu (Sinesignal, 1 kHz, Gain Max.)

-Nominal input clipping  20 dBu (Sine 1kHz)

-Priority Contact closure  +5VDC normally open for dry contact

-Connector  5-pin Terminal Block, pitch 5.08mm

Mic/Line inputs 1-2

-Nominal input sensitivity Mic  Mic: -40 dBu (sine 1 kHz, gain max)

-Nominal input sensitivity line  Line: -17 dBu (sine 1 kHz, gain max)

-Nominal input clipping Mic  Mic: -5 dBu (Sine 1kHz)

-Nominal input clipping line  Line +19dBu (Sine 1kHz)

-Phantom power  + 24V, 10mA switchable

-Connector Mic/Line1  5-pin Terminal Block, pitch 5.08mm, XLR/6.3 mm jack

-Connector Mic/Line 2  1 dual RCA Mono Summed, 3-pin Terminal Block, pitch 5.08 mm

Music inputs - CD/AUX

-Nominal input sensitivity CD/AUX  - 6.22 dBV (Sine 1 kHz, Gain max)

-Connector CD/AUX  2 x dual RCA Mono Summed

Amplifier Output

-Amplifier Outputs  High-Z: 70V or 100V outputs, Low-Z: 4 ohm minimum load

-Preamplifier input  5-pin Terminal Block, pitch 5.08mm

-RMS Power ( W )  125 W (Continuous sine wave 1kHz, 4 ohm load)

-Power ( Peak ) (W) 135 W (100 msec sine 1kHz Burst @ 4 ohm load)

-Frequency range  20 Hz - 20 kHz (LO-Z, -3 dB), 60 Hz - 20 kHz (HI-Z, -3 dB)

-Tone controlBass  +/-10 dB (100 Hz)

-Tone control Treble +/-10 dB (10 kHz)

-Protection circuits  Audio Limiter, over-current, short circuit, thermal overload

Aux Output

-Connector AUX-output 3-pin Terminal Block, pitch 5.08 mm

-Maximum gain  22 dB

Power Supply

-Operating voltage  100 V AC - 240 V AC, 50 - 60 Hz

-Power consumption (max.) 165 W (Sine 1kHz with 4 ohm load)

-Idle power consumption 13 W (no signal input)

-Power Consumption @ Standby <1 W

-Operating temperature ( non-condensing ) 0°C - 40°C; < 85% humidity

-Dimensions (W x H x D) ( height with rubber feet )210 (W)x 95 (H) x 266.76 (D)mm

    bottom of page